Bosch Motorsport » Pressure Sensors Combined
Birmingham
Pressure Sensor Combined PSM-SAT
Product Code:0 to 3.5 bar – F 02U V01 955-01
0 to 6 bar – F 02U V01 956-01
0 to 10 bar – F 02U V01 980-01
0 to 20 bar – F 02U V01 957-01
0 to 35 bar – F 02U V01 958-01
0 to 60 bar – F 02U V01 962-01
0 to 100 bar – F 02U V01 964-01
0 to 200 bar – F 02U V01 965-01
0 to 350 bar – F 02U V01 966-01
0 to 700 bar – F 02U V02 065-01
This sensor is designed to measure absolute pressure of various kinds of media e.g. Diesel, gasoline, water, engine oil, transmission oil or air plus temperature. The sensor utilizes a flush metal diaphragm as a force collector. The force is transferred to a solid state piezo-resistive sensing element via a thin intervening film of noncompressible silicone oil. The housing is welded hermetically. An individual calibration sheet will be delivered with each sensor. Variants available.
More InfoPressure Sensor Combined PST
Product Code:0 261 230 022
This sensor is designed to measure absolute air pressure and air temperature, especially the air box pressure of gasoline or Diesel engines. An integrated circuit combines a piezo-resistive sensor element, electronics for signal-amplification and temperature-compensation. The output of the sensor is an analog, ratio metric signal. An NTC resistance is used for temperature measurements.
More InfoPressure Sensor Combined PST-F
Product Code:0 261 230 147
This sensor is designed to measure absolute pressure and temperature of various kinds of fluids e.g. Diesel, gasoline, oil or transmission oil. The PST-F is equipped with a piezo-resistive pressure sensor element integrated in a silicon chip together with signal processing electronics. The active surface of this chip is exposed to a reference vacuum. The temperature sensor element is an NTC-resistor.
More InfoPressure Sensor Combined PST-F 1
Product Code:F 02U V0U 194-01
This sensor is designed to measure relative gasoline pressure and gasoline temperature in port injection systems. The pressure measurement of the sensor is by means of a piezoresistive element which is acted on by a silicon diaphragm in contact with the fluid being measured. The reference (relative) pressure is provided via an opening in the sensor housing and acts on the active upper side of the silicon diaphragm.
More InfoPressure Sensor Combined PST-F 2
Product Code:0 261 545 101
This sensor is designed to measure absolute gasoline pressure and gasoline temperature in direct injection systems. The pressure measurement is based on the expansion of a steel diaphragm, where strain gauges are placed to a Wheatstone bridge. The measured signal is proportional to the pressure and is processed in an application specific integrated circuit. The temperature measurement is conducted by an NTC thermistor. Optional accessories.
More Info