Bosch Motorsport » Linear Position Sensors
Brands Hatch
Linear Position Sensor LP 25-H
Product Code:F 02U V02 008-01
The sensor is designed to measure linear movement, e.g. the stabilizer bar movement. The electronic is designed with a stainless steel magnetic shaft with Hall element. The Hall element is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.
More InfoLinear Position Sensor LP 25 twin
Product Code:B 261 209 858-01
The LP 25 twin is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement and for use in electronic throttle control systems. Its operating mode is based on the linear tape potentiometer principle where the distance travelled between the moving ends to the wiper is proportional to the resistance between them.
More InfoLinear Position Sensor LP 50
Product Code:Connector KPSE 6E8-33P-DN – F 02U V01 319-01
Connector KPTA 6E6-4P-C-DN – B 261 209 136-01
The LP 50 is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement. The operating mode of this sensor is based on the linear tape potentiometer principle where the distance travelled between the moving end to the wiper is proportional to the resistance between them. Variants available.
More InfoLinear Position Sensor LP 50 twin
Product Code:B 261 209 859-01
The LP 50 twin is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement and for use in electronic throttle control systems. It works base on the linear tape potentiometer principle where the distance travelled between the moving end to the wiper is proportional to the resistance between them.
More InfoLinear Position Sensor LP 75
Product Code:Connector KPSE 6E8-33P-DN-A34 – B 261 209 852-01
Connector ASL 6-06-05PA-HE – B 261 209 856-01
The LP 75 is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement. The operating mode of this sensor is based on the linear tape potentiometer principle where the distance travelled between the moving end to the wiper is proportional to the resistance between them. Variants available.
More InfoLinear Position Sensor LP 100
Product Code:Connector KPSE 6E8-33P-DN-A34 – B 261 209 853-01
Connector ASL 6-06-05PA-HE – B 261 209 857-01
The LP 100 is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement. Its operating mode is based on the linear tape potentiometer principle where the distance travelled between the moving end to the wiper is proportional to the resistance between them. Variants available.
More InfoLinear Position Sensor LP 100-H
Product Code:F 02U V02 061-01
The sensor is designed to measure linear movement, e.g. the stabilizer bar movement. The electronic is designed with a stainless steel magnetic shaft with Hall element. The Hall element is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.
More InfoLinear Position Sensor LP 150
Product Code:B 261 209 534-01
The LP 150 is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement. Its operating mode is based on the linear tape potentiometer principle where the distance travelled between the moving end to the wiper is proportional to the resistance between them.
More Info