Bosch Motorsport » Rotary Position Sensors
Devon
Rotary Position Sensor RP 40-H red
Product Code:F 02U V01 997-01
This sensor is designed to measure the rotational position of the acceleration pedal. The electronic is designed with a magnetic rotary sensor with Hall elements and digital signal processing. The angular position is provided by a two pole magnet integrated in the sensor shaft. A Hall effect sensor is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.
More InfoRotary Position Sensor Mini-RP 100-M
Product Code:B 261 209 587-01
This sensor is designed to measure rotational movement, e.g. throttle angle or spring travel. A throttle rotation moves an internal slider (wiper) on a resistive element which is supplied with voltage. Thus voltage proportional to the angle can be measured. The housing and the bearings are made of high temperature resistant plastic. The mounting plate is protected with a metal cover to ensure a good fixation. The sensor is fitted in a shrink down boot for additional protection.
More InfoRotary Position Sensor RP 100/130/308
Product Code:RP 100 – B 261 209 127-01
RP 130 – B 261 209 128-02
RP 308 – B 261 209 570-01
This sensor is designed to measure rotational movement, e.g. throttle angle, spring travel, gearbox position or steering angle. A throttle rotation moves an internal slider (wiper) on a resistive element which is supplied with voltage. Thus voltage proportional to the angle can be measured. The housing and the bearings are made of high temperature resistant plastic. The mounting plate is protected with a metal cover to ensure a good fixation. The sensor is fitted in a shrink down boot for additional protection.
More InfoRotary Position Sensor RP 100-H red
Product Code:F 02U V02 196-01
This sensor is designed to measure the rotational position of the acceleration pedal. The electronic is designed with a magnetic rotary sensor with Hall elements and digital signal processing. The angular position is provided by a two pole magnet integrated in the sensor shaft. A Hall effect sensor is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.
More InfoRotary Position Sensor RP 100 twin
Product Code:Without Connector – B 261 209 591-90
With AS Connector – B 261 209 591-02
This sensor is designed to measure rotational movement, e.g. gearbox position or throttle angle. A throttle rotation moves an internal slider (wiper) on a resistive element which is supplied with voltage. Thus voltage proportional to the angle can be measured. The housing and the bearings are made of high temperature resistant plastic. The mounting plate is protected with a metal cover to ensure a good fixation. The sensor is fitted in a shrink down boot for additional protection. Variants available.
More InfoRotary Position Sensor Mini-RP 360-H
Product Code:F 02U V01 914-01
This sensor is designed to measure rotational movement, e.g. throttle angle, spring travel, gearbox position or steering angle. The electronic is designed with a magnetic rotary sensor with Hall elements and digital signal processing. The angular position is provided by a two pole magnet integrated in the sensor shaft. A Hall effect sensor is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.
More InfoRotary Position Sensor RP 360-H
Product Code:F 02U V00 641-02
This sensor is designed to measure rotational movement, e.g. throttle angle, spring travel, gearbox position or steering angle. The electronic is designed with a magnetic rotary sensor with Hall elements and digital signal processing. The angular position is provided by a two pole magnet integrated in the sensor shaft. A Hall effect sensor is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.
More Info