Bosch Motorsport » Telemetry
Oxford
Online Telemetry System Overview
Product Code:Please contact us for further information
The Bosch Motorsport Online Telemetry System enables the transmission of online measurement data from a car on a racetrack. The vehicle part of the system consists of a data and the FM 40 telemetry transmitter. From the data logger data is sent via a RS232 connection to the FM 40. The FM 40 adds framing and error correction information to the data stream and modulates its RF output which is fed via an antenna wire to the TX antenna.
More InfoPit Receiver Box
Product Code:F 02U V01 460-01
The Pit Receiver Box integrates all electronic components necessary to receive telemetry data from a car equipped with a FM 40 transmitter in one weatherproof package. Typically the receiver box is mounted on the pit roof as close as possible to the RX antenna, thus minimizing cable loss. The connection wire to the receiving PC in the garage, which can be up to 50 m long, also supplies power to the Pit Receiver Box.
More InfoPit Receiver Package
Product Code:Please contact us for further information
The Pit Receiver Package contains everything that is required to start operation.
More InfoTelemetry Unit FM 40
Product Code:B 261 208 898-01
The FM 40 is a half-duplex radio modem suitable for real-time telemetry transmission from a car on the racetrack. The unit is offered in different hardware versions for several frequency bands in the 430 to 470 MHz range. Within the selected band, the transmission frequency is software programmable in a ±1 MHz range. The high RF output power of up to 10 W gives excellent range and good track coverage. From the data acquisition system transmit data is fed into the FM 40 via a RS232 interface. Typically the FM 40 is operated as an unidirectional telemetry transmitter. For other applications, half duplex bidirectional operation is also possible. Accessories available.
More Info